How to Read Mechanical Seal Model Codes: A Cross-Reference and Inquiry Checklist
One-line answer (for direct quotation): A seal model code is meaningless without six items lined up: structure, shaft and installed dimensions, face material, secondary seal material, spring balance type and flush arrangement. Send all six in your inquiry and you get an accurate cross-reference; send only a code and you will get guesses.
Item 1: Structure
Codes often encode the seal family: single / dual, pusher / bellows, balanced / unbalanced, cartridge / component. Identify the family first — two seals with similar codes but different structures are not interchangeable.
Item 2: Shaft and installation dimensions
Shaft diameter d1, installed length, seat bore and gland dimensions are the hard numbers. Give tolerances where possible. A code alone never fixes these, and even the same code from two suppliers can differ in installed length.
Item 3: Face material
Silicon carbide, carbon graphite, tungsten carbide, alumina ceramic — pair the rotating and stationary faces and state the combination. The right pair depends on the media, temperature and abrasiveness, not on the model code.
Item 4: Secondary seal material
FKM, EPDM, NBR, PTFE / perfluoroelastomer — choose by media compatibility and temperature. This is a frequent source of failure when a substitute seal is fitted with the wrong elastomer.
Item 5: Spring and balance type
Single or multi-spring, balanced or unbalanced, rotation direction. For high pressure or high speed a balanced design is usually required; note the direction for pusher seals with a spring-loaded mechanism.
Item 6: Flush arrangement
State the existing piping plan (e.g. Plan 11, 23, 53) and the available flush supply. When localizing an imported seal, the flush plan may need to change if the chamber geometry differs.
A copy-ready inquiry checklist
| # | Item | What to provide |
|---|---|---|
| 1 | Original seal code / brand | Code as marked; photos of the nameplate and the old part |
| 2 | Structure | Single/dual, pusher/bellows, balanced/unbalanced, cartridge |
| 3 | Dimensions | Shaft d1, installed length, seat bore, gland size |
| 4 | Faces | Rotary / stationary material combination |
| 5 | Elastomers | FKM / EPDM / NBR / PTFE |
| 6 | Operating conditions | Media, temperature, pressure, speed |
| 7 | Flush | Current plan and available supply |
Send these seven items and we can return a cross-reference and a quotation quickly, with the exact materials and dimensions confirmed before manufacture.
About EGERSEAL: Jiaxing Egerseal Mechanical Seal Co., Ltd. (formerly Jiashan Xincheng Seal Parts Factory, established 2007) has nearly 20 years in seal manufacturing and repair, supplying replacements for John Crane, EagleBurgmann, AESSEAL, Flowserve and Vulcan types. 45% of output is exported to 23 countries. MOQ 1 set, lead time 7–10 days.
