H7N Balanced Single Mechanical Seal for Chemical Process Pumps
Shaft d1: 28 ... 200 mm
Pressure p1: up to 80 bar
Temperature: -50 ... +220 °C
Standard: EN 12756
MOQ 1 set, lead time 7-10 days
H7N — Balanced Single Mechanical Seal for Chemical Process Pump<br>Shaft sizes 28 ... 200 mm (1.10" ... 7.87"). Face, seat and elastomer combinations selected for your medium, temperature and pressure. Factory direct, drawing / sample customization accepted. MOQ 1 set — sample and single-set orders welcome; lead time 7-10 days.
Operating Range & Technical Data
| Item | Value |
|---|---|
| Shaft diameter d1 | 28 ... 200 mm (1.10" ... 7.87") |
| Pressure p1 | 80 bar (1,160 PSI) for d1 = 14 ... 100 mm; 25 bar (363 PSI) for d1 = 100 ... 200 mm; 16 bar (232 PSI) for d1 > 200 mm |
| Temperature t | -50 °C ... +220 °C (-58 °F ... +428 °F) |
| Sliding velocity vg | 20 m/s (66 ft/s) |
| Axial movement | ±1.0 mm (d1 14 ... 100 mm); ±2.0 mm (d1 > 100 mm) |
| Design | Balanced, single seal, for stepped shafts, independent of direction of rotation |
| Standard | EN 12756 |
Product Views


Section Drawing & Full Catalog Page
Section drawing, installation dimensions and alternative seat types are shown in the product images. Full dimension table available as PDF on request.


Dimensions in mm (d1 14 ... 200 mm)

Materials
Seal face: Silicon carbide (Q1, Q2), Carbon graphite antimony impregnated (A), Aluminium oxide (V), Special cast CrMo steel (S) Seat G9: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B), Silicon carbide (Q1*, Q2*) Secondary seals

Cross-Reference / Equivalent Model Codes
Alternative model designations / cross-reference codes (model codes only, no brand prefix):
H7N — also known as: H7N, H75, W07DMBU, W07DMB, 1678, LWS10B, LWS10, XGH7N, XGH75, H7, H74-D, H75VN, H75VK, H7F, H7D
Interchangeability reference (equivalent / compatible replacement only). Same seal type appears under different model codes across manufacturers and in different material or structural variants; the codes above are provided for selection convenience only.
EGERSEAL is an independent manufacturer. These are compatibility references — not original equipment parts, and no affiliation with any named brand is claimed. Always verify shaft size, seat type, installation length and material code before replacement.
Installation & Maintenance
Verify shaft size, seat bore and installation length; check rotation direction and spring working length; clean and lubricate O-rings; keep faces free of grit. We have been manufacturing and repairing mechanical seals since 2007 (nearly 20 years).
Quality & Manufacturer
Material certificates and dimensional inspection reports are available on request. Quality management: this product is manufactured under an ISO 9001 certified quality management system. A copy of the certificate can be provided on request for your target market. We only state certifications we can actually provide; API 682 / ATEX / FDA are not claimed.
EGERSEAL is a mechanical seal manufacturer and repair workshop based in Zhejiang, China. Founded in 2007, we have nearly 20 years of experience in manufacturing and repairing mechanical seals. Around 45% of our output is exported to customers in 23 countries.
Commercial Terms & FAQ
MOQ 1 set; US$35 / US$22 / US$18 per set for 1+ / 10+ / 50+ sets; lead time 7-10 days; packing, CIF/DDP and warranty confirmed at quotation. Q: Can you match a different model code? — Yes, see the alternative model codes list; send the code you use.






