EGERSEAL Reaction Kettle Seal
206 Mechanical Seal for Slurry Pumps and Desulphurization Pumps
Basic Features
Structure: Double-End
Pressure: General Pressure Mechanical Seals
Speed: General Speed Mechanical Seal
Temperature: General Temperature Mechanical Seal
Performance: Wear and Corrosion
Standard: DIN24960, GB6556, ISO3069
Model NO.: MN206
Balance: Unbalanced
Specification: Inner Diameter: 25 mm to 160 mm
Product Detailed Description
206 Mechanical Seal for Slurry Pumps and Desulphurization Pumps
Structural Features: double end, multiple springs, unbalanced, independent rotary direction, lug transmission. The axial dimensions are small and the load on the seal faces are balanced. The compensation components are pre-assembled as a whole body. The seal is easy to install and widely used. It is suitable to transfer crystallized mediums with particles. Circulated Barrier liquid is needed for operation. The barrier liquid pressure should be 0.1 to 0.2 MPa higher than the pressure of the sealed mediums. The barrier liquid will not leak into the mediums so the product will not be contaminated.
Industrial Standards: DIN24960, GB6556, ISO3069
Scopes of Application: widely used for working with mediums such as crystallized acid, alkali and organic solvents. Used in coal washery, mines, water treatment, metallurgical plants, oil refining, and aluminium oxide production. It is specifically designed for slurry pumps and desulphurization pumps.
Operation Parameters:
Pressure: 0 to 1 MPa
Temperature: - 40 ºC to 180 ºC
Linear Speed: 15 m/s or less
Materials:
Rotary Ring Face: Carbon/SiC/TC
Stationary Ring Face: Carbon/SiC/TC
Elastomers: FKM/Aflas/EPDM/FFKM
Springs: SS304/SS316/HC276
Metal Parts: 2Cr13/SS304/SS316L
Mediums: Solid content no more than 25% such as coal cinder, slag, clinker, slurry, alumina powder etc.
Customization: Changes of materials for getting other operating parameters are possible. Contact us with your requirements.
