E-mail: sales@egerseal.com Tel: +86-13666783111
Home > Products > Metal Bellow Seals > MFL65 Mechanical Seal

MFL65 Metal Bellows Mechanical Seal

Shaft d116 ... 100 mm (0.64" ... 4"),
Temperature t- 20 °C ... +400 °C (- 4 °F ... +752 °F)
Sliding velocity vg50 m/s (165 ft/s)
DesignMetal Bellows
StandardEN 12756

1. Product overview

MFL65 — Metal Bellows Single Mechanical Seal for Chemical Process Pump Shaft sizes 16 ... 100 mm (0.64" ... 4"),. Face, seat and elastomer combinations selected for your medium, temperature and pressure. Factory direct, drawing / sample customization accepted. MOQ 1 set — sample and single-set orders welcome; lead time 7-10 days.

2. Operating limits

Shaft diameter d1: 16 ... 100 mm (0.64" ... 4"),
Pressure p1: confirm at quotation
Temperature t: - 20 °C ... +400 °C (- 4 °F ... +752 °F)
Sliding velocity vg: 50 m/s (165 ft/s)

Shaft d116 ... 100 mm (0.64" ... 4"),
Temperature t- 20 °C ... +400 °C (- 4 °F ... +752 °F)
Sliding velocity vg50 m/s (165 ft/s)
DesignMetal Bellows
StandardEN 12756

3. Dimensions and drawings

Section drawing, installation dimensions and alternative seat types are shown in the product images. Full dimension table available as PDF on request.

4. Materials of construction

Bellows: Inconel® 718 (M6), Hastelloy® C-276 (M5) Seal face: Carbon graphite antimony impregnated (A), Silicon carbide (Q12) Seat: Silicon carbide (Q1), Special cast CrMo steel (S) Metal parts: Duplex (G1), Carpenter® 42 (T4), Hastelloy® C-4 (M)

5. Cross-reference / equivalent model codes

Alternative model designations / cross-reference codes (model codes only, no brand prefix): MFL65 — also known as: MFL65, 680, BQFD, 670, 1SC1BX, BXH, 186HT, WB400, 450, 500, BGM65, BGM65F, BGM65-D, MFL65N, MFL65F, MFL65D Interchangeability reference (equivalent / compatible replacement only). Same seal type appears under different model codes across manufacturers and in different material or structural variants; the codes above are provided for selection convenience only. EGERSEAL is an independent manufacturer. These are compatibility references — not original equipment parts, and no affiliation with any named brand is claimed. Always verify shaft size, seat type, installation length and material code before replacement.

All alias codes: MFL65 / 680 / BQFD / 670 / 1SC1BX / BXH / 186HT / WB400 / 450 / 500 / BGM65 / BGM65F / BGM65-D / MFL65N / MFL65F / MFL65D

6. Installation and maintenance

Verify shaft size, seat bore and installation length; check rotation direction and spring working length; clean and lubricate O-rings; keep faces free of grit. We have been manufacturing and repairing mechanical seals since 2007 (nearly 20 years).

7. Quality and certification

Material certificates and dimensional inspection reports are available on request. Quality management: this product is manufactured under an ISO 9001 certified quality management system. A copy of the certificate can be provided on request for your target market. We only state certifications we can actually provide; API 682 / ATEX / FDA are not claimed.

8. Factory capability

EGERSEAL is a mechanical seal manufacturer and repair workshop based in Zhejiang, China. Founded in 2007, we have nearly 20 years of experience in manufacturing and repairing mechanical seals. Around 45% of our output is exported to customers in 23 countries.

9. Commercial terms and FAQ

MOQ 1 set; US$35 / US$22 / US$18 per set for 1+ / 10+ / 50+ sets; lead time 7-10 days; packing, CIF/DDP and warranty confirmed at quotation. Q: Can you match a different model code? — Yes, see the alternative model codes list; send the code you use.

What operating conditions does the MFL65 mechanical seal cover?

Shaft 16 ... 100 mm (0.64" ... 4"),, pressure , temperature - 20 °C ... +400 °C (- 4 °F ... +752 °F), sliding velocity 50 m/s (165 ft/s), Metal Bellows design, to EN 12756. Typical duty: chemical process pumps, refining, pulp and paper, water and waste water.

Which model codes are interchangeable with MFL65?

Cross-reference codes: 680, BQFD, 670, 1SC1BX, BXH, 186HT. Different manufacturers use different codes for the same seal type; confirm shaft size, installed length and face materials before ordering.

Can you customize to drawing or sample, and what is the MOQ?

Yes. Face, seat and elastomer materials can be specified to drawing or sample. MOQ 1 set, lead time 7-10 days; packing, CIF/DDP and warranty confirmed at quotation.

Browse all models

All mechanical seal models A-Z | Back to Metal Bellow Seals